building materials brick AAC surfacing ›› cement plasters ›› surfacing of plaster adhesives mortar metal profiles

construction equipment plastering machines AAC cutting machine

HOUSE project house projects

Commercial Department
TEL: +40 244 33 78 17
FAX: +40 244 37 57 89
comercial.office@soceram.ro

SOCERAM DOICESTI
Street Aleea Sinaia, No 16
Doicesti, Dambovita County

SOCERAM BUCOV
Street Industriei, No 1
Bucov, Prahova County

SOCERAM URZICENI
Street Vanatorilor, No 1
Urziceni, Ialomita County

[+] more photos

Cement plasters

Scope
For finishing surfaces without excessive moisture, before painting, painting or papering. Surfaces can be concrete, cement-based dry plaster, cement, lime, with a minimum length of 28 days, the unevenness does not exceed 3 mm/m.

Application mode
The support of the application of plaster must be flat, clean, dry, sticky and no major cracks. Product is sprinkle in cold and clean water, mix to obtain a homogeneous paste, allow approx. 5 minutes, after which reshuffled. The paste thus obtained is ready for use. Application is made with a stainless steel plaster tool in uniform layers (maximum thickness 2 mm). For application in several layers, successively layer will be applied after the previous layer strengthening (minimum 10 hours). Surface can be polished after 24 hours. If the application is made above 20°C, strengthening time is extends.

Packing
Packaging is done in bags weighing 20 kg, 48 bags per pallet.

Storage
Indoors and dry spaces, on the pallet, in original and undamaged packaging, at temperatures between 5°C … 30°C.

Warranty
Validity period is 12 months from the date of manufacture, following the transport and storage prescriptions.

Working temperature	5°C …30° C
Mixture ratio	20 kg product / cca 8-9 liters water
Estimated consumption	1.2 … 1.3 kg/mp, for a layer 1 mm thick
For commissioning work:	about 40 minutes from the preparation of the pulp

› ORDER NOW THIS PRODUCT